Yearly Archives: 2016

Home/2016

fillet-and-corner-radii

By |2016-09-04T08:47:50+00:00September 4th, 2016|injection molding|

FORGING DIMENSIONS The maximum permissible dimensions and weight of a forging are governed by the forging hammers available. The aluminum alloy forgings permits the forging pf pieces up to 36 in. long, 6 in. wide, [...]

features of broaching

By |2016-05-30T14:44:12+00:00May 30th, 2016|Broaching|

Tolerances and Finish The following table gives the tolerances possible through broaching and the recommended design tolerances for minimizing cost when a broaching operation is specified: Summary Holes and Splines Gear Teeth External Surfaces Tolerances [...]

Stainless Steels

By |2016-05-14T01:11:36+00:00May 15th, 2016|Stainless Steels|

Stainless Steels The use of stainless steels for plastics PET preform molds making has grown steadily in the past few years. The primary purpose of using stainless steelfor molds is to avoid corrosion from the [...]

Load More Posts