injection molding

/injection molding

SEMI-POSITIVE TYPE MOLD

By | 2017-12-12T01:57:09+00:00 September 13th, 2017|injection molding|

SEMI-POSITIVE TYPE MOLD Because of the difficulty of fitting positive molds, and because scoring is detrimental to the finish of the casting, a semi-positive mold is a good compromise design. Fig. 28 is a diagram [...]

fillet-and-corner-radii

By | 2016-09-04T08:47:50+00:00 September 4th, 2016|injection molding|

FORGING DIMENSIONS The maximum permissible dimensions and weight of a forging are governed by the forging hammers available. The aluminum alloy forgings permits the forging pf pieces up to 36 in. long, 6 in. wide, [...]

Load More Posts