Battery Case Mould | Custom Injection Tooling for Production

We build custom battery case moulds for manufacturers producing automotive lead-acid housings, UPS backup enclosures, and lithium battery pack cases. Select your target battery housing specification below and request a battery case mould quote for your production line.

Request a battery case mould quote

Confirm Case and Cover Scope Before Pricing

A battery enclosure requires both a lower container and a matching top lid, which are quoted as separate moulds. Specify your primary cell configuration and whether you need the case mould alone or a matched case-and-lid toolset.

Tooling Package Mould Scope Quotation Basis
Battery Case Only Deep-cavity single- or multi-cavity mould with internal cell partition blades Quoted by external footprint and cell count
Top Cover / Lid Only Multi-slide or lifter mould for terminal bushings, vent ports, and welding ribs Quoted separately from the lower container
Matched Case & Lid Set Two dedicated moulds engineered for heat-seal or ultrasonic welding alignment Itemized separately within one project quote

What Changes Mould Scope and Price

Internal partition blade thickness: Deep, thin cell dividers require high-precision EDM machining and balanced injection fill so blades do not deflect during moulding.

Lid terminal and vent complexity: Top covers with lead-bushing inserts, central degassing channels, or handle pockets need extra side-cores and precision shut-offs.

Resin and chemical resistance: Acid-resistant PP copolymers and flame-retardant ABS or PC/ABS blends require matched shrinkage allowances and corrosion-resistant steel grades.

Steel grade and production output: Pre-hardened 718H or hardened H13 steel prevents premature wear along thin partition ribs during continuous high-volume runs.

What a Confirmed Quotation Covers

An initial review checks feasibility from a standard battery group code or dimensional sketch, while a firm quotation locks in exact steel, runner, and delivery terms. Every confirmed battery case mould quotation defines:

  • Core, cavity, and partition insert steel grades matched to your resin and annual shot volume
  • Hot runner or valve-gate feed layout balanced across all internal cell compartments
  • Deep-core cooling channels and beryllium-copper inserts to prevent wall bowing after ejection
  • Stripper-plate or air-assisted ejection layout, T1 trial sample scope, and export crate packing

Frequently Asked Questions

Can the battery case and top lid be moulded in one family tool?

Rarely. Deep battery containers and flat multi-slide lids need different clamping strokes, cooling times, and ejection mechanisms, so separate moulds run faster and hold tighter welding tolerances.

Can you quote a battery case mould from an existing sample or DIN/JIS size?

Yes, we can prepare an initial budget estimate from a standard group size, dimensional drawing, or physical sample. A firm quotation requires finalized 3D files or sample measurements to verify partition draft and welding rib geometry.

Which details affect our delivery schedule most?

Terminal insert drawings, lid welding interface sign-off, and partition wall thickness changes after steel cutting starts have the biggest impact on delivery.

Start Your Battery Case Mould Enquiry

Send us two or three details about your target battery housing to begin an initial DFM and tooling review:

  • Your battery type (automotive SLI, AGM, UPS, or lithium pack), external dimensions, and cell count
  • Whether you need the case mould only or both the case and top cover moulds
  • Your planned resin (such as PP copolymer or flame-retardant ABS) and a 3D CAD file, sketch, or reference photo

Submit your drawings and project details through our contact page to request a battery case mould quote.

ISO 9001 ยท 20+ YEARS
Got A Mold Project?
Send your 3D files or drawings. Get a detailed DFM quote within 24 hours โ€” no obligation.
SEND INQUIRY โ†’
or email
sales@plasticmoulds.net