We build custom plastic stool moulds for manufacturers producing stackable household stools, step stools, and counter-height bar stools. Choose your primary launch height below and request a plastic stool mould quote for your production line.
Request a plastic stool mould quote
Select Your Launch Stool Height First
If you are comparing two seat heights, start by requesting a quotation for your primary launch height and price the second size separately. Stool height dictates mould shut height, draw depth, and required press opening stroke.
| Stool Variant | Tooling Scope | Quotation Basis |
|---|---|---|
| Low Household or Bath Stool | Compact single-cavity or two-cavity mould with shallower draw depth | Quoted as a standalone launch mould |
| Standard Dining or Kitchen Stool | Deep-cavity single-cavity mould sized for medium press stroke | Quoted separately by exact seat height |
| Tall Bar or Counter Stool | Deep-draw mould base requiring extra daylight and long-reach cooling | Quoted separately from standard-height stools |
What Changes Mould Scope and Price
Seat height and draw depth: Taller stools require thicker mould plates, longer ejector strokes, and presses with wider daylight openings.
Woven, rattan, or ventilated tops: Cutout patterns on the seat surface add shut-off surfaces and require precise venting to avoid short shots or burn marks.
Two-colour or anti-slip overmoulding: Adding TPE anti-slip foot pads or a contrasting seat top requires either a two-shot mould or a second-stage overmoulding tool.
Steel grade and cavity count: Pre-hardened steels such as 718H or 1.2738 suit high-volume PP production, while smaller bath stools can run in a multi-cavity layout when press tonnage allows.
What a Confirmed Quotation Covers
An initial review checks feasibility from a reference photo or height specification, while a firm quotation locks in exact steel, runner, and delivery terms. Every confirmed plastic stool mould quotation defines:
- Core and cavity steel grades matched to your expected shot volume and resin
- Hot runner or cold runner feed layout centered on the seat top for uniform leg fill
- Cooling channel layout, including deep leg bubblers or baffles to prevent inward leg warpage
- Ejection layout, T1 trial sample scope, and export wooden crate packing
Frequently Asked Questions
Can one mould produce two different stool heights?
No. Changing seat height alters the leg length, draft taper, and core block dimensions, so each height requires its own dedicated mould. Interchangeable inserts only work for minor seat-top logos or surface textures.
Can you quote a plastic stool mould without a 3D CAD file?
Yes, we can provide an initial budget estimate from a clear reference design and your target seat heights. A firm quotation requires a finalized 3D file or physical sample so we can verify wall thickness, stacking clearance, and press stroke.
Which details affect our delivery schedule most?
Texture sign-off and changes to leg rib thickness or stacking height after steel cutting starts have the biggest impact on the final delivery date.
Start Your Plastic Stool Mould Enquiry
Send us two or three details about your launch stool to begin an initial DFM and tooling review:
- Your target seat heights (for example, 250 mm low stool or 450 mm dining stool) and approximate top dimensions
- A 3D CAD file, dimension sketch, or photo of a reference design
- Your planned resin (such as PP or HDPE) and injection press daylight or tonnage, if already known
Submit your reference design and target heights through our contact page to request a plastic stool mould quote. If your range also includes full-back seating, review our plastic chair mould page.
