We build custom paint bucket moulds for packaging manufacturers producing round and oval pails with tamper-evident lids. Select your primary launch capacity below and request a paint bucket mould quote for your production line.
Request a paint bucket mould quote
Select Your Launch Bucket Capacity First

If you are launching a range of pail sizes, request a quotation for your primary launch volume first and price additional capacities separately. Bucket volume determines draw depth, wall-thickness ratio, and whether the pail and lid require dedicated presses.
| Bucket Capacity | Tooling Scope | Quotation Basis |
|---|---|---|
| Small Pail (1L – 5L) | Single-cavity or multi-cavity mould sized for faster cycle times | Quoted separately from the matching lid mould |
| Medium Pail (10L – 15L) | Single-cavity deep-draw mould with rim sliders for tamper-evident skirts | Quoted by exact capacity and wall thickness |
| Large Industrial Pail (18L – 25L) | Heavy-duty single-cavity mould requiring high injection pressure and long press stroke | Quoted as a standalone pail tool plus lid tool |
What Changes Mould Scope and Price
Rim and tamper-evident skirt design: Undercut stacking ribs and tear-off tamper bands require precision rim sliders or collapsible core rings.
In-mould labelling (IML) readiness: Pails built for IML decoration need dedicated vacuum ports, static-pin locations, and tight wall uniformity so labels bond without air pockets.
Plastic handle vs. metal bail ears: Moulded-in plastic handles require an extra handle mould, while metal wire handles need reinforced side-ear bosses on the bucket rim.
Steel hardness for thin-wall cycles: Hardened H13 or DIN 1.2344 steel resists high injection pressures and maintains concentricity across millions of thin-wall PP or HDPE cycles.
What a Confirmed Quotation Covers
An initial review checks feasibility from a target litre volume or sample pail, while a firm quotation locks in exact steel, hot runner, and cycle terms. Every confirmed paint bucket mould quotation defines:
- Core, cavity, and rim-slider steel grades hardened for thin-wall, high-speed packaging runs
- Single-drop valve-gate hot runner system centered on the bucket base for concentric fill
- High-efficiency spiral and baffle cooling circuits across both core and cavity plates
- Stripper-ring and air-poppet ejection layout, T1 trial sample scope, and export crate packing
Frequently Asked Questions
Are the paint bucket and lid made in the same mould?
No. A deep pail and a flat tamper-evident lid have completely different draw depths and cooling cycles, so each requires its own dedicated mould.
Can you quote a paint bucket mould from a sample pail or capacity target?
Yes, we can provide an initial budget estimate from your target litre capacity, approximate dimensions, or a reference photo. A firm quotation requires a finalized 3D file or physical sample so we can verify rim locking geometry and stack load.
Which details affect our delivery schedule most?
Lid snap-fit testing, IML label die-cut drawings, and changes to wall thickness after steel cutting starts have the biggest impact on delivery.
Start Your Paint Bucket Mould Enquiry
Send us two or three details about your launch pail to begin an initial DFM and tooling review:
- Your target bucket volume (for example, 5L, 10L, or 20L) and round or oval shape
- Whether you need the bucket mould only, the lid mould, or an integrated plastic handle mould
- Your decoration method (plain, offset print, or IML) and a 3D CAD file, sketch, or reference photo
Submit your specifications through our contact page to request a paint bucket mould quote.
