We build custom plastic dustbin moulds for municipal waste suppliers and household manufacturers producing 2-wheel bins, 4-wheel commercial containers, and pedal bins. Select your launch capacity below and request a plastic dustbin mould quote for your production line.
Request a plastic dustbin mould quote
Select Your Launch Bin Capacity First
If you are launching a multi-size waste bin range, request a quotation for your primary launch litre volume first and price additional capacities separately. Bin height and wall thickness determine draw depth, press daylight, and whether the body, lid, and wheels require separate moulds.
| Dustbin Capacity | Tooling Scope | Quotation Basis |
|---|---|---|
| Indoor Pedal or Swing Bin (10L – 60L) | Deep-cavity body mould plus separate moulds for the hinged lid, inner liner, and foot pedal | Quoted by exact capacity and component count |
| 2-Wheel Municipal Bin (120L – 360L) | Deep-draw single-cavity body mould with top-rim comb-lift slides and separate hinged lid mould | Quoted separately from smaller or larger capacities |
| 4-Wheel Commercial Container (660L – 1100L) | Heavy-duty single-cavity mould with hydraulic rim slides, trunnion pockets, and drain plug core | Quoted as a standalone container mould plus lid mould |
What Changes Mould Scope and Price
EN 840 comb-lift rim and trunnion pockets: Municipal wheelie bins designed for truck lifter arms require heavy-duty hydraulic side-slides to form reinforced front combs and side lifting trunnions.
Lid, wheel, and axle-housing scope: A complete wheelie bin requires separate moulds for the body, lid, and plastic wheel hubs, plus hinge-pin inserts sized to your assembly method.
Long-reach core cooling: Deep-draw bins need baffled core fountains and beryllium-copper inserts near the top rim to prevent inward wall bowing and speed up ejection.
Steel grade and HDPE impact strength: Pre-hardened forged 718H or 1.2738 steel resists high injection pressures across thick-walled HDPE bins built for outdoor UV and cold-impact testing.
What a Confirmed Quotation Covers
An initial review checks feasibility from a target litre size or reference bin, while a firm quotation locks in exact steel, hot runner, and press-interface terms. Every confirmed plastic dustbin mould quotation defines:
- Core, cavity, and rim-slide steel grades matched to your expected annual shot volume and HDPE grade
- Multi-drop sequential valve-gate hot runner layout balanced across the bin base for uniform wall fill
- Deep-core cooling circuits and air-assisted stripper ejection to release tall bodies without vacuum distortion
- Hydraulic core-pull layout, T1 trial sample scope, and heavy-duty export frame packing
Frequently Asked Questions
Are the dustbin body and lid made in the same mould?
No. A tall dustbin body and a flat hinged lid require different draw depths, clamping strokes, and cooling cycles, so each requires its own dedicated mould.
Can you quote a plastic dustbin mould without a 3D CAD file?
Yes, we can prepare an initial budget estimate from your target litre capacity, EN 840 standard class, and reference photos. A firm quotation requires a finalized 3D file or physical sample so we can verify comb-lift dimensions and press daylight.
Which details affect our delivery schedule most?
Lifter-comb interface sign-off, hot runner manifold lead time, and wall-thickness changes after steel cutting starts have the biggest impact on delivery.
Start Your Plastic Dustbin Mould Enquiry
Send us two or three details about your dustbin project to begin an initial DFM and tooling review:
- Your target capacity (for example, 120L, 240L, 660L, or 1100L) and municipal wheelie vs. indoor pedal style
- Whether you need the bin body mould only or additional moulds for the lid, wheels, and pedal mechanism
- Your planned resin (such as virgin or recycled HDPE or PP) and a 3D CAD file, sketch, or reference photo
Submit your specifications through our contact page to request a plastic dustbin mould quote. For warehouse and industrial containers, see our stackable crate mould and paint bucket mould pages.
