Plastic Bottle Cap Mould | Multi-Cavity Closure Tooling

We build custom plastic bottle cap moulds for beverage, edible oil, and household packaging manufacturers producing screw caps, tamper-evident closures, and flip-top caps. Confirm your bottle neck finish and target cavity count below to request a plastic bottle cap mould quote.

Request a plastic bottle cap mould quote

Confirm Closure Type and Cavity Count Before Pricing

Each bottle neck standard (such as 28 mm PCO 1881, 30/25 water neck, or 38 mm wide-mouth) requires its own dedicated mould with matched thread pitches and sealing plugs. Select your closure style and cavity layout matched to your injection press tonnage.

Closure Variant Tooling Configuration Quotation Basis
Water & CSD Tamper-Evident Screw Cap Multi-cavity mould (16, 24, 32, or 48 cavities) with forced bump-off ejection or collapsible cores Quoted by neck finish, cavity count, and cycle spec
Hinged Flip-Top or Dispensing Cap Multi-cavity mould (8 to 32 cavities) with in-mould closing mechanism or motorized unscrewing racks Quoted separately from standard single-piece screw caps
5-Gallon Water Jug or Edible Oil Cap Multi-cavity mould (4 to 16 cavities) with precision inner plug seals and tear-tab ring cores Quoted by cap diameter, linerless seal design, and cavity count

What Changes Mould Scope and Price

Bump-off ejection vs. motorized unscrewing: Shallow, rounded HDPE/PP threads can strip cleanly by bump-off ejection, whereas deep, sharp threads or multi-start closures require rack-and-pinion unscrewing systems.

Tamper-evident band and slitting: Moulded-in bridges with collapsible core rings add moving precision inserts, while solid bands designed for post-moulding slitting simplify core geometry.

Flip-top hinge and in-mould closing: Dispensing caps with living hinges need balanced two-point or single-edge gating and integrated closing cams if automated lid assembly is required.

Corrosion-resistant hardened steel: Through-hardened S136 or Stavax ESR stainless steel (48–52 HRC) prevents thread wear, resists moisture condensation, and maintains parting-line tightness over millions of cycles.

What a Confirmed Quotation Covers

An initial review checks feasibility from a neck standard drawing or sample cap, while a firm quotation locks in exact steel, hot runner, and interchangeability terms. Every confirmed plastic bottle cap mould quotation defines:

  • Individual interchangeable core, cavity, and stripper-ring inserts hardened to 48–52 HRC
  • Balanced needle-valve or open-tip hot runner system with individual temperature control per nozzle
  • Independent helical cooling circuits around every cavity insert and core pin for short cycle times
  • Air-assisted stripper ejection or unscrewing drive layout, T1 trial sample scope, and export crate packing

Frequently Asked Questions

Can one mould produce two different bottle neck sizes?

No. Changing the neck diameter or thread pitch requires replacing all cavity, core, and stripper inserts, so each neck finish requires a dedicated mould.

Can you quote a plastic bottle cap mould from an existing bottle neck or sample cap?

Yes, we can prepare an initial budget estimate from a standard neck code (such as PCO 1881 or 29/25) or sample photos. A firm quotation requires finalized 3D CAD drawings or physical bottle and cap samples so we can verify seal interference and torque retention.

Which details affect our delivery schedule most?

Leak-test and top-load sign-off, tamper-band bridge design (moulded vs. slit), and cavity count changes after steel cutting starts have the biggest impact on delivery.

Start Your Plastic Bottle Cap Mould Enquiry

Send us two or three details about your closure project to begin an initial DFM and tooling review:

  • Your bottle neck finish standard (for example, 28 mm PCO 1881, 30/25, or 38 mm) and screw vs. flip-top style
  • Your target cavity count (such as 16, 24, 32, or 48 cavities) and injection press tonnage or tie-bar spacing
  • Your planned resin (HDPE or PP) and a 3D CAD file, neck drawing, or reference cap photo

Submit your neck specifications and sample details through our contact page to request a plastic bottle cap mould quote. For related food and liquid packaging, see our thin-wall food container mould and paint bucket mould pages.

ISO 9001 · 20+ YEARS
Got A Mold Project?
Send your 3D files or drawings. Get a detailed DFM quote within 24 hours — no obligation.
SEND INQUIRY →
or email
sales@plasticmoulds.net