Medical Syringe Mould | Barrel & Plunger Injection Tooling

We build custom medical syringe moulds for cleanroom medical device manufacturers producing 2-part and 3-part disposable syringe barrels, plungers, and Luer hubs. Select your launch syringe capacity and nozzle type below to request a medical syringe mould quote.

Request a medical syringe mould quote

Confirm Syringe Capacity and Component Scope Before Pricing

Each syringe volume (such as 1 mL, 3 mL, 5 mL, 10 mL, or 20 mL) requires its own dedicated barrel and plunger moulds to maintain ISO 7886 bore tolerances and smooth gasket sliding friction. Specify your primary launch capacity first and confirm whether you need barrel, plunger, or cap tooling.

Syringe Component Tooling Configuration Quotation Basis
Syringe Barrel (Luer Slip or Luer Lock) High-cavitation mould (16, 24, 32, or 48 cavities) with precision-ground bore core pins and thread or taper nozzle inserts Quoted by syringe capacity, Luer tip design, and cavity count
Syringe Plunger Rod (2-Part or 3-Part) Multi-cavity mould (16, 24, 32, or 48 cavities) with cross-ribbed core splits and gasket-tip retention features Quoted separately from the matching syringe barrel mould
Protective Tip Cap or Needle Shield Multi-cavity closure mould (16 to 64 cavities) engineered for tight Luer sealing and cleanroom automated assembly Itemized separately within your syringe tooling quote

What Changes Mould Scope and Price

Luer Slip vs. Luer Lock nozzle geometry: Eccentric or concentric Luer Slip tips use straight core pins, whereas Luer Lock barrels require internal thread unscrewing cores or precision split-thread inserts.

Bore concentricity and core pin straightness: Slender barrel core pins require precision cylindrical grinding, taper interlocks, and balanced gating so internal bore diameter stays uniform along the full stroke without leakage.

2-part PE plunger vs. 3-part PP plunger: Two-part syringes require an integral sealing lip on an HDPE plunger, while three-part syringes use a rigid PP plunger tip designed to snap into a rubber or TPE gasket.

Corrosion-resistant hardened tool steel: Through-hardened Stavax ESR or S136 stainless steel (50–54 HRC) maintains optical barrel clarity, resists cleanroom humidity, and allows individual cavity and core stack replacement.

What a Confirmed Quotation Covers

An initial review checks feasibility from a syringe specification drawing or reference sample, while a firm quotation locks in exact steel, concentricity, and hot runner terms. Every confirmed medical syringe mould quotation defines:

  • Individually replaceable core pins, cavity sleeves, and Luer nozzle inserts hardened to 50–54 HRC
  • Balanced valve-gate hot runner system with individual nozzle temperature control for medical-grade PP or HDPE
  • Independent helical cooling circuits around every cavity sleeve and core pin for short cleanroom cycles
  • Guided stripper-plate ejection or unscrewing drive layout, T1 trial sample scope, and export crate packing

Frequently Asked Questions

Can the syringe barrel and plunger be moulded in one family mould?

No. The barrel uses clarified medical PP with deep cylindrical core pins, while the plunger uses different flow lengths and rib geometry (or HDPE for 2-part designs), so each requires a dedicated mould.

Can you quote a medical syringe mould without a 3D CAD file?

Yes, we can prepare an initial budget estimate from a target millilitre volume, Luer Slip or Luer Lock specification, and reference samples. A firm quotation requires finalized 3D CAD drawings or physical samples so we can verify ISO 80369 Luer tapers and gasket interference.

Which details affect our delivery schedule most?

Luer taper gauge verification, gasket sliding-force sign-off, and cavity count changes after steel cutting starts have the biggest impact on delivery.

Start Your Medical Syringe Mould Enquiry

Send us two or three details about your syringe project to begin an initial DFM and tooling review:

  • Your target syringe volume (for example, 1 mL insulin, 3 mL, 5 mL, or 10 mL) and Luer Slip vs. Luer Lock nozzle style
  • Your syringe design (2-part vs. 3-part) and which moulds you need (barrel, plunger, or tip cap)
  • Your target cavity count (such as 16, 24, 32, or 48 cavities) and a 3D CAD file, ISO drawing, or reference sample

Submit your specifications and sample details through our contact page to request a medical syringe mould quote. For related cleanroom medical and lab tooling, see our pipette tip mould and centrifuge tube mould pages.

ISO 9001 · 20+ YEARS
Got A Mold Project?
Send your 3D files or drawings. Get a detailed DFM quote within 24 hours — no obligation.
SEND INQUIRY →
or email
sales@plasticmoulds.net