US Tariff Buying Guide
Section 338 Tariffs Changed Again: What to Write Into Your Next Mold Purchase Order
Section 338 tariffs are not a fixed rate you can quote once and forget. Write the legal basis, the refund owner, and the entry-date rule into your purchase order. That wording matters more than any single rate. A rate can change by proclamation. A clear clause decides who pays when it does.
Section 338 Tariffs in One Minute
Section 338 tariffs come from Section 338 of the Tariff Act of 1930. The statute lets the president add duties of up to 50 percent. The target is a country found to discriminate against United States commerce. No president had used it to impose a tariff before this year. That fact alone should change how buyers read a quote.
The current Section 338 tariffs target certain products of Canada. They started with Proclamation 11048 on July 20, 2026. The rate is 50 percent ad valorem on listed goods. The list, not the rate, is what keeps moving.
A mold buyer should note one boundary at once. Section 338 tariffs do not, by themselves, put a duty on molds shipped from China. This article is about contract wording, not a new mold duty. The lesson travels across origins because the same pattern hit China sourcing earlier this year.
What Changed on October 30
A proclamation signed on October 23, 2026 reshuffled the Canada list again. The changes took effect for goods entered for consumption, or withdrawn from a warehouse for consumption, at 12:01 a.m. Eastern Time on October 30, 2026. Entry date controls the duty, not order date.
Twenty-two tariff lines left the list. The removals included corrugated cartons and boxes, plastic packing boxes and crates, and certain thin plywood sheets. About 100 lines joined the list. The additions included carpets and rugs, shampoo and soap, paints, kraft paper, unprinted pressure-sensitive labels, and hand tools.
One removal deserves a plain warning. A code leaving the Section 338 list does not become duty free by itself. Other duties, including Section 232 duties where they apply, can still remain. Check the full duty stack for that code, not just one list.
The White House proclamation also states the Section 338 duty applies on top of applicable Section 232 duties. It applies whether or not a good qualifies under the United States-Mexico-Canada Agreement. A buyer who assumed a USMCA claim would remove the charge would be wrong here.
For the full official text, read the White House proclamation modifying the Section 338 product scope. For a plain summary of what moved in and out, see the Flexport summary of the October 30 Section 338 changes.
Why the Legal Basis Keeps Changing
The tariff story in 2026 is a change of legal track, not a tariff cut. On February 20, 2026, the Supreme Court ruled on IEEPA tariffs. It held that the act did not authorize the president to impose tariffs. The IEEPA tariff base fell, and refunds followed for duties paid under it. Our earlier tariff relief explainer tracked the first relief lists for plastics buyers.
A Section 122 surcharge took over at 10 percent on February 24, 2026. The statute caps that tool at 15 percent and 150 days. In May 2026, the Court of International Trade held the Section 122 proclamation unlawful. That ruling remains on appeal, and the surcharge expired in July 2026.
Section 301 duties then carried the broad coverage forward. A Section 301 forced-labor tariff framework took effect in late July 2026. China sat in the 12.5 percent band under that framework. Section 301 has no 150-day cap, so it can run far longer than Section 122 could.
Section 338 is now the fourth track in this sequence for Canada goods. On October 20, 2026, food importer Gellert Global Group filed the first court challenge to the Section 338 tariffs. The case, CIT No. 26-04636, seeks class treatment for importers that paid Section 338 duties on entries from August 22, 2026 onward. On October 23, the court assigned the case to a three-judge panel. No injunction had been granted when this article was written.
Gellert argues Congress replaced Section 338 with Section 301, which requires investigation, public comment, and other safeguards. Gellert also argues the administration broke the 30-day waiting period in Section 338. Cheeses were added on September 8, 2026, yet duties were collected from September 15, only seven days later. The complaint says Gellert paid over $520,000 in duties on 22 cheese entries from September 16 to October 11, 2026. Over $381,000 of that sum came from entries made before October 8.
Read the filer’s own account in the Liberty Justice Center announcement of the Gellert Section 338 lawsuit. The court has not decided the case, so treat every argument above as a claim, not a ruling.
What This Means for Mold Buyers
Most mold buyers do not import Canadian cheese, carpets, or plywood. The direct hit from Section 338 tariffs on a China-built mold is nil on current lists. The risk sits one step sideways, in packaging, spares, and any Canadian-origin input that rides with a shipment.
Plastic packing boxes and crates left the October 30 list. That helps a buyer whose crates crossed from Canada. It does not help a buyer who shipped the same crates a week earlier. Entry date, again, is the line that decides the bill.
The wider risk is contract language written for a stable rate. A quote that says “duty included” without naming the duty invites a dispute when the basis changes. A quote that names only a percentage invites the same dispute when the list changes. Both gaps showed up in 2026, first under IEEPA and now under Section 338.
Buyers who follow the IEEPA refund process already know the second half of this lesson. Refunds go to the importer of record, and the broker’s records decide who can claim. If your purchase order never says who owns a later refund, you may fund a claim you cannot collect. Our IEEPA refund guide explains who can claim and when.
Five Clauses to Add to Your PO
Use these five clauses as a checklist with your broker, not as legal advice. A trade lawyer should review the final wording for your shipments. Each clause answers one question that 2026 already forced buyers to ask.
| Clause | What it must say | What it prevents |
|---|---|---|
| Duty bearer | Who pays each named duty, by statute and code | A vague “duty included” fight |
| Basis-change trigger | A new statute, list change, or court ruling reopens price | Silent absorption of a new charge |
| Refund ownership | Refunds and interest go to the party that bore the duty | A lost refund claim |
| Entry-date rule | The duty rate follows the customs entry date | An order-date assumption |
| Code verification | Broker confirms the HTS code before shipment | A wrong-code surprise at entry |
Start with the duty bearer clause. Name the importer of record, the delivery term, and each duty you expect. DDP does not answer every question by itself. State whether DDP covers duties imposed after the quote date, or only duties in force on that date.
Add a basis-change trigger next. A court ruling, a new proclamation, or a list swap should reopen the price discussion, not void the order. Set a short window for requoting, such as five working days from the change. Silence in that window should mean acceptance, not a hidden surcharge later.
Write refund ownership in the same paragraph as payment. If a duty is later held unlawful, the refund and any interest belong to the party that paid it. Require the broker to share entry numbers and liquidation status on request. Without those records, a refund claim stalls before it starts.
Fix the entry-date rule in writing. State that the duty rate is the rate in force on the customs entry date. That single sentence would have settled many October arguments about goods shipped before October 30 but entered after it. The EU PVC anti-dumping probe shows the same entry-date risk in Europe.
Close with code verification. Ask your broker to confirm the HTS code for each shipped item before it leaves the factory. A packing crate and a molded part can sit under different codes. A list change can move one without moving the other. Resin costs move beside duty, as our resin price spikes guide explains.
Check a Shipment Before It Moves
Run this check on every cross-border shipment while lists keep changing. First, confirm origin country for each item, not just the shipment as a whole. Second, confirm the HTS code for each item against the current list. Third, confirm the expected entry date, since that date picks the rate.
Fourth, ask the broker which duties stack on that code. Section 338 can sit on top of Section 232, and Section 301 can sit beside other duties. A single-rate quote hides that stack. Fifth, save the entry summary and the duty receipt under the purchase order number.
One habit pays for itself here. Keep a one-line tariff log per order: code, origin, entry date, duty paid, and broker contact. When a refund window opens, that log turns a search through old emails into a same-day filing check. When a list swaps again, the same log shows which open orders need a requote.
Run the Landed Cost Math
A mold quote is not a landed cost. Duty, freight, insurance, broker fees, and port fees sit between the factory price and the price at your dock. A 50 percent duty on one input can dwarf a hard-won discount on the mold itself. Run the full stack before you approve a purchase order.
Use the landed-cost estimator below. Enter the ex-works price, freight, and the duty rate for your code. Change the duty rate to test a list swap before it hits a live shipment. The tool also covers finish grades and mold steel, so the same page can test a finish change beside a duty change.
Free Injection Molding Decision Tools by
Send your part drawings and target delivery terms. We will price the mold and flag the duty terms before you commit.
